ÃÛ¶¹ÊÓƵ

Configurable Load Switch and Reset Timer

Favorite

Overview

The FTL11639 is both a timer for resetting a mobile device and an advanced load management device for applications requiring a highly integrated solution.
If the mobile device is off, holding /SR0 LOW (by pressing power-on key) for 38 ms ±20% turns on the PMIC.
As a reset timer, it has one input and one fixed delay output. It generates a fixed delay of 11.5 s ±20% by disconnecting the PMIC from the battery power supply. FTL11639 does not accept a new input signal for 400 ms ±20% to give the PMIC enough time to turn off.
The reset delay can be customized by connecting an external resistor to the DELAY_ADJ pin.
As an advanced load management switch, the FTL11639 disconnects loads powered from the DC power rail (<6 V) with stringent off-state current targets and high load capacitances (up to 200 µF). The FTL11639 consists of a slew-rate controlled low-impedance MOSFET switch (21 mΠtypical at 4.5 V) that has exceptionally low off-state current drain (<0.2 µA typical) to facilitate compliance with standby power requirements. The slew-rate-controlled turn-on characteristic prevents inrush current and the resulting excessive voltage drop on power rails.
The low ICCT enables direct interface to lower-voltage chipsets without external translation, while maintaining low power consumption.
The device is packaged in advanced, fully “green,†1.31 mm x 1.62 mm, Wafer-Level Chip-Scale Packaging (WLCSP); providing excellent thermal conductivity, small footprint, and low electrical resistance for a wide application range.

  • Consumer
  • Consumer Appliances
  • E-book Reader
  • Mobile Handsets
  • Mobile Comm Infrastructure
  • Portable Devices
  • Portable Navigation
  • Factory Customized Turn-on Time: 38 ms
  • Factory Customized Turn-off Delay: 900 ms
  • Factory Programmed Reset Delay: 11.5 s
  • Factory Programmed Reset Pulse: 400 ms
  • Low < 0.2 µA Typical Shutdown Current
  • Off Pin Turns Off Load Switch to Maintain Battery Charge during Shipment and Inventory (Ready to Use Right Out of the Box)
  • Typical RON: 21 mΩ (Typ.) at VBAT=4.5 V
  • 3.8 A / 4.5 A Maximum Continuous Current (JEDEC 2S2P, No VIA / with Thermal VIA)
  • Adjustable Reset Delay by an External Resistor (Optional)
  • Low ICCT Saves Power Interfacing to Low-Voltage Chips
  • Input Voltage Operating Range: 1.2 V to 5.5 V
  • Over-Voltage Protection: Allow Input Pins > VBAT
  • Slew Rate / Inrush Control with tR: 2.7 ms (Typical)
  • Output Capacitor Discharge Function
  • IEC61000-4-2, Level 4 compliant SYS_WAKE Pin
  • Zero-Second Test-Mode Enable
  • 8 kV HBM ESD (per JESD22-A114)
  • ESD Protected:
  • 2 kV CDM (per JESD22-C101)
  • 10 kV HBM ESD (Pin to Pin, VBAT & VOUT)

Product List

If you wish to buy products or product samples, please log in to your ÃÛ¶¹ÊÓƵ account.

Search

Close Search

ÃÛ¶¹ÊÓƵ:

1

Share

Product Groups:

Orderable Parts:

1

Product

Status

CAD Models

Compliance

Package Type

Case Outline

MSL Type

MSL Temp (°C)

Container Type

Container Qty.

ON Target

Voltages Monitored

VCC Max (V)

V(TO) Typ (V)

IQ Typ (µA)

Reset Active State

Reset Timer

Manual Reset

Watchdog Timer

Reference Price

FTL11639UCX

Loading...

Obsolete

CAD Model

Pb

A

H

P

WLCSP-12

1

260

REEL

3000

N

1

5.5

-

5

Low

Yes

No

No

Price N/A

More Details

Show More

1-25 of 25

ÃÛ¶¹ÊÓƵ per page

Jump to :